Keyence EX-V Series Manual de usuario descargar pdf (Pagina 64)

Chapter 4 Use of Data Processing Functions

■ Sampling period

Specify the length of the sampling period after the hold-reset input.

• The sampling delay time and sampling period are specified with time length.

The unit of the setting display is "ms".

Example

1000.1 = 1000.1 ms

Note 1: The sampling delay time and sampling period can be specified within the

range of 0.1 to 19999.9 ms.

Note 2: When the measurement type is set to "b-0", settings " [-0", "[-1", "[-22"

and "[-23" cannot be selected.

Setting function "["

1. Press the key for at least 2 seconds.

The sensor enters the common function selection mode.

2. Press the

key to make function "[" flash.

3. Press the

or key to select the function setting mode.

4. Press the

key to select the desired function.

When "[-0" is selected:

5. Press the key.

The sensor saves the setting and returns to the measurement state.

(Time)

Sampling period

Trigger point Starting point

The measured value is displayed/output

at this point.

Sampling

delay time

1 2 ... 59 60 61 62 63 64 65 66 67 68 69 ... 119 120

Lao 20 Nov 2024 | 23:59:11

Keyence EX-V Series Manual de usuario Pagina 64