Keyence DL-EP1 Manual de usuario descargar pdf (Pagina 32)

- EtherNet/IP Compatible Network Unit DL-EP1 User’s Manual (FD-MH) -

3-2 DL-EP1 EtherNet/IP Communication Function

3-4

Communicating with FD-MH Series

sensor amplifier's output signals and comparator values and error status without

ladder programs.

Configurations such as RPI and data size for cyclic communication are set

on the scanner side.

In a network which has many connected devices, including EtherNet/IP

devices, a delay or packet loss could occur if a large load is constantly or

temporarily applied on the network. Verify the settings carefully before

operation.

 Message communication

Message communication can be used for applications which do not require a

punctuality like cyclic communication.

In message communication, various parameters, including data which can be

exchanged with cyclic communication, can be read and written. Functions specific

to sensors such as the sensor amplifier preset function can also be executed.

PLC

EtherNet/IP scanner

RPI=3 (ms)*

RPI=0.5 (ms)*

RPI=5 (ms)*

RPI=10 (ms)*

Various EtherNet/IP adaptors

Ethernet

* RPI (Requested Packet Interval) can be set

individually for each connection.

Point

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 119 120

Sin comentarios

Keyence DL-EP1 Manual de usuario Pagina 32