Keyence DL-EP1 Manual de usuario descargar pdf (Pagina 109)

5-5 Objects Usable by DL-EP1

5-29

TCP/IP Interface Object

Appendix

- EtherNet/IP Compatible Network Unit DL-EP1 User’s Manual (FD-MH) -

*1 If an invalid value is written, the general status 09H (Invalid Attribute Value) is

returned.

*2 When automatic allocation is selected, the start multicast address is calculated

from the expression

"239.192.1.0+ ((IP address host section -1) & 03FFH) x 32).

(Example)

When the IP address is 192.168.0.10, the multicast address is as follows:

Start address = 239.192.1.0 + (((192.168.0.10 - 1) & 0x3FF) << 5)

= 239.192.1.0 + ((192.168.0.9 & 0x3FF) << 5)

= 239.192.1.0 + (0.0.0.9 << 5)

= 239.192.1.0 + 0.0.1.32

= 239.192.2.32

Reference 1) Status list

Reference 2) Configuration capability list

Reference 3) Configuration control list

Bit Name Description

0 to 3

Interface Configuration

Status

0: IP address is not set (BOOTP start state).

1: IP address is set.

2 or higher: The DL-EP1 returns nothing.

4 Mcast Pending

This bit is set to 1 when "TTL Value" or "Mcast Config" is

set.

This bit is cleared to 0 when the power is turned on

again.

5 to 31 Reserved All these bits are fixed at OFF.

Bit Name Description

0 BOOTP Client ON (fixed)

1 DNS Client OFF (fixed)

2 DHCP Client OFF (fixed)

3 DHCP-DNS Update OFF (fixed)

4 Configuration Settable ON (fixed)

5 to 31 Reserved OFF (fixed)

Bit Name Description

0 to 3 StartupConfiguration

Display and set the "IP address setting method" of the IP

address setting tool.

0: Fixed IP address

1:BOOTP

2 to 15: The IP address cannot be set. If the IP address is

set, the general status 09H (Bad attribute data value) is

returned.

4 DNS Enable OFF (fixed): The operation set by this bit is ignored.

5 to 31 Reserved All these bits are fixed at OFF.

1 2 ... 104 105 106 107 108 109 110 111 112 113 114 ... 119 120

Comentarios a estos manuales

Sin comentarios

Keyence DL-EP1 Manual de usuario Pagina 109

Comentarios a estos manuales

Relacionado con productos y manuales para Sensores Keyence DL-EP1