Keyence GP-M Series Manual de usuario Pagina 1

Environment Resisting TypeBuilt-in-amplifier Pressure SensorsGP-M SeriesInstruction ManualRead this instruction manual before using the product in ord

10When turning the power ON for the first time after delivery, set the initial settings according to the outline below.* On this screen, press the V b

11• The atmospheric pressure correction will be reflected on the analog output.Function for preventing operation error.Key Lock• If the Key Lock is en

12Change the setting value of output 1. The changing of setting values of output 2 is done by pressing and holding the MODE button. (Refer to page 15)

13* On this screen, press the V button 5 times while pressing and holding the button to move to the unit switch screen “7PKV”. By using UV the unit

14Pressing and U at the same time will return to the previous screen.Initialization Value ListItem Default value (by model)ModelGP-M001GP-M010GP-M025

15 Settings of Each Setting FunctionPush brieflyMODEPush brieflyMODEPush brieflyMODEPush brieflyMODEPush brieflyMODEPus

16 • While setting any items you can return to the main screen by pressing and holding the button.• Pressing and U at the same time will return th

17 Detection mode and setting valueThe GP-M Series has two types of detection modes which are described below.When the selected function of output 2

18If *;5 is fixed at 0.5% of F.S., the presence or absence of hysterisis can be selected by the extended function (page 16). Free range analog output

19 Offset correctionConcerning the value at the time of shipping, there may be as much as ±10%F.S. offset correction.This activates in the case of a

2 SymbolsIn this instruction manual, the following symbols will be used to so that important points can be understood at one glance.Be sure to read t

20 ResponsivenessThe time until 100% response of the internal judgment value can be set from within the range of 3 to 5000 (ms).The response time of

21Error Display and CountermeasuresError displayCause MeasuresAt the time of atmospheric pressure correction there is ±10% F.S. applied pressure.R

22Specifications (Differs by model type)ModelGP-M001GP-M010GP-M025GP-M100GP-M250GP-M400Rated pressure-100 to +100kPa-0.1 to +1MPa-0.1 to +2.5MPa0 to +

23Medium temperature-20 to +100°C (no freezing/condensation)*3 *6Power supply voltage10-30 VDC, Ripple (P-P): 10% max,Class 2 or LPSCurrent consumptio

24*1 This is the value when considering linearity + hysterisis + repeatability in a stable environment of 23°C.*2 The repeatability, based on consiste

25Dimensions(27.5)44.386.7ø34.244.6ø30(Two surface width)2729.22.615.4G3/4 AUseable length 10M12 × 1Detecting elementø11 depth 1.2 (GP-M001/M010/M025)

26(1) KEYENCE warrants the Products to be free of defects in materials and workmanship for a period of one (1) year from the date of shipment. If any

27INDIRECT, INCIDENTAL, PUNITIVE, SPECIAL OR CONSEQUENTIAL DAMAGES (INCLUDING, WITHOUT LIMITATION, ANY DAMAGES RESULTING FROM LOSS OF USE, BUSINESS IN

Copyright (c) 2011 KEYENCE CORPORATION. All rights reserved.11843E 1012-1a 96M11843 Printed in Japan

3 CE MarkingKEYENCE Corporation has confirmed that this product complies with the essential requirements of the applicable EC Directives, based on th

4 CSA CertificateGP-M Series complies with the following CSA and UL standards and has been certified by CSA.• Applicable standard CAN/CSA C22.2 No.61

5 Precautions for wiring Other precautions1. Do not modify or disassemble unnecessarily. It may cause electric shock or improper operation.2. Do not

64. Do not remove the seal of the air hole of the GP-M001/M010/M025. It will no longer be waterproof.5. When condensation occurs, it may become imposs

7* Only for the GP-M001/M010/M025 Piping• Use the adapter for matching with the diameter of the piping.• When using a replacement adapter, attach the

8 Precautions when installingz Attaching the couplingThe recommended tightening torque when installing the adapter to the main body of the sensor is

9 Output diagramz When choosing an NPN output*When choosing the function of output 2 QWV (control output) only.z When choosing a PNP output*When choo