Keyence AP-C30(P) Series Manual de usuario descargar pdf

Ultra-compact Digital

Pressure Sensor

AP-C30 (P) Series

Instruction Manual

1. Safety Precautions

WARNING

●

Do not use this product in safety circuits such as those designed to

protect human workers.

●

This product does not employ an explosion-proof construction. Do

not use it in the presence of flammable gasses, liquids, or powders.

●

This is a direct current power supply type sensor. Application of an

alternating current may result in explosion or fire.

■

Accessories

3. Pipe Connections

You can select from one of two pressure ports: one on the back of the

sensor that can accommodate a pipe leading directly away from the back

of the sensor, and one on the side of the sensor to accommodate a pipe

leading away from the sensor at a right angle.

1) The pressure port is 1/8 of Rc (PT). Commercially available air pres-

sure joints and nipples can be used with the port.

When attaching the joint, use a wrench to hold the pressure port in

place as illustrated below.

Hold in place

with wrench

(12mm).

2) Attach the included valve plug to the pressure port not being used.

Hold in place with

wrench (12 mm).

Hexagonal

wrench (5mm)

Valve plug with

hexagonal hole

CAUTION

• Do not use a torque in excess of 10 Nm when tightening the joint.

Doing so may damage the joint.

• Apply sealing tape when attaching the joint in order to prevent air leaks.

4. Mounting Brackets (option)

Dedicated mounting hardware is available for the sensor, allowing it to

be installed in a range of locations.

Horizontal mounting bracket Wall mounting bracket

(AP-BO1) (AP-BO2)

Faceplate/ceiling mounting bracket Tilted mounting bracket

(AP-BO3) (AP-BO4)

Substitution bracket

(AP-BO5)

●

1 connector cable (2 m)

●

1 unit scale label

(AP-C33 only)

2. Part Names

SET AP-C33 MODE

MPa

Pressure display unit

Pressure display

Mode button

Manual adjustment button

Set button

Wiring

connector

Pressure

port (rear)

Pressure port

(side)

Mounting screws

(M3 x 2)

Operational indicator

Output 1 Output 2

1 2

Approx. 90

●

1 valve plug with hexagonal hole

●

1 instruction

manual

96M1312

1. Safety Precautions

2. Part Names

3. Pipe Connections

4. Mounting Brackets (option)

5. Connection Method and Diagrams

6. Precautions for Safe Use

7. Detection Mode Operation

8. Sensor Configuration

9. Explanation of Features

. Active Tuning

. Default Mode Settings (Initialization)

. Specifications

. Ambient Pressure Compensation

. Key Lock

. Error Displays and Corrective Actions

1 2 3 4 5 6

Indice de contenidos

Pagina 1 - Instruction Manual

1Ultra-compact Digital Pressure Sensor AP-C30 (P) SeriesInstruction Manual1. Safety PrecautionsWARNING ● Do not use this product in safety circuits

Pagina 2 - 7. Detection Mode Operation

2AP-AO1 Panel mounting bracketSET AP-C33 MODEMPaSET AP-C40 MODEMPaPanel mounting ringPanel-mounted sampleFront protective coverPanel-mounted sample5.

Pagina 3 - Target object

3After 4 sec of no key operation.Reference value*Press for 3 sec or more.++Increase the setting.Decrease the setting.Operating modeStandardFocus modeA

Pagina 4 - Start Finish

49. Explanation of Features Switching the detection range (AP-C30/C35) The AP-C30/C35 allows you to select a detection range.Negative pressurePosit

Pagina 5 - Display Cause Solution

513. Ambient Pressure CompensationOpen the applied pressure to the surrounding air so that it equals the ambient pressure and press the button for 3

Pagina 6 - WARRANTIES AND DISCLAIMERS

Comentarios a estos manuales

Sin comentarios

Keyence AP-C30(P) Series Manual de usuario

Busca en linea o descarga Manual de usuario para Sensores Keyence AP-C30(P) Series. KEYENCE AP-C30(P) Series User Manual [en] Manual de usuario

Indice de contenidos

Comentarios a estos manuales

Relacionado con productos y manuales para Sensores Keyence AP-C30(P) Series