Keyence AP-C30WP Manual de usuario descargar pdf

Ultra-compact Digital

Pressure Sensor

AP-C30W (P) Series

Instruction Manual

1. Safety Precautions

WARNING

●

Do not use this product in safety circuits such as those designed to

protect human workers.

●

This product does not employ an explosion-proof construction. Do not

use it in the presence of flammable gasses, liquids, or powders.

●

This is a direct current power supply type sensor. Application of an

alternating current may result in explosion or fire.

■ Accessories

???

96M1192

3. Pipe Connections

You can select from one of two pressure ports: one on the back of the

sensor that can accommodate a pipe leading directly away from the back

of the sensor, and one on the side of the sensor to accommodate a pipe

leading away from the sensor at a right angle.

1) The pressure port is 1/8 of Rc (PT). Commercially available air pressure

joints and nipples can be used with the port.

When attaching the joint, use a wrench to hold the pressure port in

place as illustrated below.

Hold in place

with wrench

(12mm).

2) Attach the included valve plug to the pressure port not being used.

Hold in place with

wrench (12 mm).

Hexagonal

wrench (5mm)

Valve plug with

hexagonal hole

CAUTION

• Do not use a torque in excess of 10 Nm when tightening the joint.

Doing so may damage the joint.

• Apply sealing tape when attaching the joint in order to prevent air leaks.

4. Mounting Brackets (option)

Dedicated mounting hardware is available for the sensor, allowing it to be

installed in a range of locations.

Horizontal mounting bracket Wall mounting bracket

(AP-BO1) (AP-BO2)

Faceplate/ceiling mounting bracket Tilted mounting bracket

(AP-BO3) (AP-BO4)

Substitution bracket (AP-BO5)

* Distance between arms is same as the AP-30/40 Series brackets.

●

1 connector cable (2 m)

●

1 unit scale label

2. Part Names

SET AP-C33W MODE

MPa

Pressure display unit

*Apply the units sticker here.

Pressure display

Mode button

Manual adjustment button

Set button

Wiring

connector

Pressure

port (rear)

Pressure port

(side)

Mounting screws

(M3 x 2)

Operational indicator

Output 1 Output 2

1 2

Approx. ± 90°

●

1 valve plug with hexagonal hole

●

1 instruction

manual

1 2 3 4 5

Indice de contenidos

Pagina 1 - Instruction Manual

1Ultra-compact DigitalPressure SensorAP-C30W (P) SeriesInstruction Manual1. Safety PrecautionsWARNING●Do not use this product in safety circuits such

Pagina 2 - 7. Detection Mode Operation

2AP-AO1 Panel mounting bracketSETAP-C33MODEMPaSETAP-C40MODEMPaPanel mounting ringPanel-mounted samplePanel-mounted sampleFront protective coverPanel-m

Pagina 3 - 8. Sensor Configuration

3After 4 sec of no key operation.Reference value*Press for 3 sec or more.++Increase the setting.Decrease the setting.Operating modeStandardFocus modeA

Pagina 4 - . Active Tuning

49. Explanation of Features Switching the detection range (AP-C30W(P) only)The AP-C30WP allows you to select a detection range. (When using Pa units)

Pagina 5 - Display Cause Solution

511. Ambient Pressure CompensationOpen the applied pressure to the surrounding air so that it equals theambient pressure and press the button for 3