Keyence DL-DN1 Manual de usuario Pagina 22

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 84
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 21
2-1 Installation and Connection to Sensor Amplifiers
2-6
- DeviceNet Compatible Network Unit DL-DN1 User's Manual -
2
Connection and Configuration
Connecting to sensor amplifiers (panel mounting type)
1
Connect the optional expansion cable (OP-35361) between the sensor
amplifier and the DeviceNet compatible communication unit, DL-DN1.
2
Remove the sensor amplifier connector (for DIN rail mounting type) from
the DeviceNet compatible communication unit, DL-DN1, using pliers. In its
place, attach the expansion connector sticker supplied with the DL-DN1.
Turn off the power and connect the expansion cable securely. If
the cable is not correctly connected, the DL-DN1 may be
damaged when the power is turned on.
Do not attach or detach the cable with the power on, as this may
damage the DL-DN1.
Peel off the protective sticker.
Expansion cable (300 mm long)
NOTICE
Sensor amplifier connector
(for DIN rail mounting type)
Expansion connector sticker
Vista de pagina 21
1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 83 84

Comentarios a estos manuales

Sin comentarios