Keyence LK-H2 Manual de usuario descargar pdf (Pagina 22)

2-10

2 Preparations before Operating

Refer to the following explanations before selecting the other options.

• "Read from file": Refer to "Read from file" (page 2-10).

• "Read controller settings": Refer to "Read controller settings" (page 2-10).

Click "OK".

The program initializes.

Read from file

At the "Select startup configuration setting" dialog, select "Read from file".

Click "OK".

The "Open file " dialog appears.

Select the settings file to load.

Click "Open".

The settings are read.

Clicking "Cancel" results in the same operation as "Start up with the default values". (page 2-9).

Read controller settings

At the "Select startup configuration setting" dialog, select "Read controller settings".

Click "OK".

The settings are read from the controller.

This communication uses the last used settings when LK-Navigator 2 was closed before.

• If a controller is not connected or communication fails, an error message will be displayed.

• When LK-Navigator 2 is launched for the first time, it is set to the following communication setting.

Interface: USB

• A communication failure will result in the same operation as "Start up with the default values"

(page

2-9)

Reference

NOTE

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 75 76

Sin comentarios

Keyence LK-H2 Manual de usuario Pagina 22