Keyence DL-RB1A Manual de usuario descargar pdf (Pagina 22)

Mounting and Connecting the DL-RB1A

2-1 Connecting the DL-RB1A to External Devices

 Precautions when wiring (OP-23139 and OP-42224)

Carefully follow the precautions below when performing wiring.

• Use a single shielded cable.

• Use the following type of compliant cable:

Cable size: AWG24 to 22 (stranded)

Cross-section: 0.2 to 0.3 mm

Cable sheath diameter: 1.5 to 1.1

• Cut the end of the cable straight across.

• After performing the wiring, check that the cable is securely held in the clamp and that it is inserted

firmly.

• Cut the cable clearly so that no loose threads remain. (The sheath does not need to be removed.)

• Use the thin cable contacts OP-30594 (200 pieces included) for AWG28 to 26.

(Use this together with OP-23139 or OP-42224.)

Cable size: AWG28 to 26

Cross-section: 0.08 to 0.14 mm

Cable sheath diameter: 1.3 to 1.1

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 39 40

Sin comentarios

Keyence DL-RB1A Manual de usuario Pagina 22