Keyence DL-PD1 Manual de usuario descargar pdf (Pagina 19)

2-1 Installation and Connection to a Sensor Amplifier

2-5

- PROFIBUS DP Compatible Network Unit DL-PD1 User's Manual (IG) -

Connection and Configuration

Setting the Station Address

Set the station address of the DL-PD1 with the rotary switch at the top of the DL-PD1.

The station address set here must be the same as the one set through the configuration

software of the PROFIBUS DP.

Point

• The station address of the DL-PD1 cannot be set to 00, 100, or more.

• Set the station address before the DL-PD1 is powered on. When the

station address is changed during operations of the DL-PD1, such

change is reflected after power has been restored to the DL-PD1.

• The station address setting (Set_Slave_Adress) via PROFIBUS DP is

not supported.

Station address setting switch Setting range: 01 to 99

Default value: 11

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 73 74

Sin comentarios

Keyence DL-PD1 Manual de usuario Pagina 19