Keyence KV-D20 Manual de usuario descargar pdf (Pagina 23)

2. Overview and Operation

* Enter "0" in Bits 7 and following.

Note: To set special utility relay 2513 to reset the KV-D20, turn on (SET) 2513 for

one scan as shown below. The relay is automatically turned off after the KV-D20 is

reset.

Precautions about screen change function

Disabling mode (screen) change setting

Do not disable the mode (screen) change setting during operation.

■ When change setting is disabled for the current mode (screen):

The setting is not effective until the current mode (screen) is changed to another

mode (screen).

To activate the setting immediately, turn on special utility relay 2513 for one scan.

Note: To set special utility relay 2513 to reset the KV-D20, turn on (SET) 2513 for

one scan as shown below. The relay is automatically turned off after the KV-D20 is

reset.

When the setting is activated in the operator mode, the screen is switched to the

next available screen.

For example, when the screen change is set to the operator screen, KV-I/O monitor

screen, or switch comment screens while the direct access screen (DM1677) is

displayed, the screen is switched to the KV-I/O monitor screen after the setting is

activated.

When special utility relay 2508 is turned off in the device mode or special utility

relay 2509 is turned off in the system mode and the setting is activated, the current

mode is switched to the operator mode.

* When the operator screen is displayed, the screen change setting is not acti-

vated unless it is changed to another screen with the

key. Pressing the ▲ or

▼ key only to change pages does not activate the screen change setting.

6761MDedoM

0tiB neercsrotarepO

1tiB )7761MD(neercssseccatceriD

2tiB )8761MD(neercssseccatceriD

3tiB )9761MD(neercssseccatceriD

4tiB neercsrotinomO/I-VK

5tiB neercstnemmochctiwS

6tiB neercstnemmocpmaL

XXXX 1000

DIFU

1000

2513

SET

xxxx: Condition (Trigger input)

egnahcforedrOneercS

0 neercsrotarepO

1 )7761MD(neercssseccatceriD

2 )8761MD(neercssseccatceriD

3 )9761MD(neercssseccatceriD

4 neercsrotinomO/I-VK

5 neercstnemmochctiwS

6 neercstnemmocpmaL

XXXX 1000

DIFU

1000

2513

SET

xxxx: Condition (Trigger input)

kv_d20_manual.p65 08.3.10, 6:08 PM23

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 71 72

Comentarios a estos manuales

Sin comentarios

Keyence KV-D20 Manual de usuario Pagina 23

Comentarios a estos manuales

Relacionado con productos y manuales para Sensores Keyence KV-D20