Keyence IV Series Manual de usuario descargar pdf (Pagina 5)

IV Series (Sensor) - IM_E



Short-range type

100

150

10 20 30 4012 36

View H (mm)

Installed distance WD (mm)



Long-rang type

View H (mm)

Installed distance WD (mm)

500

300

1500

1000

2000

2500

10045 200 300 400

The value of View H and V will be a half of the value on

the gures above when using the digital zooming function

(monochrome type only).

Mounting the mounting adapter

Use the mounting adapter (accessory or OP-87460) to

mount the sensor.

The mounting adapter is mounted on the

sensor in the default factory setting. Remove

it from the sensor.

“Unmounting the sensor” (Page 5)



Mounting on the wall



Screw : M3 x 4

Use the commercially available screws which have head

thickness of 3 mm or lower.



Tightening torque : 1.0 N·m or lower



Mounting from the jig side



Screw : M4 x 4

Use the commercially available screws.



Tightening torque : 1.5 N·m or lower

For details on mounting hole dimensions, refer

to “Dimensions” (Page 8).

Mounting the sensor onto the mounting adapter

Mount the sensor to the left and right stopper on

the mounting adapter.

Sensors cannot be mounted on the side with the

indicator light.

Push the sensor to the

stopper of xing screw

Push until you hear the clicking

sound from the both side stoppers

Indicator light

Fix the mounting adapter and sensor using the

attached screws.



Screw : M3 x 1

Use the attached screws.



Tightening torque : 0.45 to 0.55 N·m

Remove the protection

sheet (blue)

Unmounting the sensor

Dismount the screw.

Pull out the stopper of the mounting adapter and

unmount the sensor.

Pull out the

stopper

1 2 3 4 5 6 7 8 9 10

Comentarios a estos manuales

Sankaranarayanan 19 Feb 2025 | 15:15:34

Download

Keyence IV Series Manual de usuario Pagina 5

Comentarios a estos manuales

Relacionado con productos y manuales para Sensores Keyence IV Series