Keyence BL-1300 Series Manual de usuario descargar pdf (Pagina 2)

E BL-1300-IM

 For proper use of this product

 UL Certificate

The BL-1300 Series is an UL/c-UL certified product.

• UL File No. E207185, E167973

• UL category NRAQ/NRAQ7, NWGQ2/NWGQ8

Be sure to observe the following installation and environment conditions.

• Be sure to use a power supply that provides class 2 output as defined

in NFPA70 (NEC: National Electrical Code).

• Pollution degree 2

• Overvoltage category I

 FDA regulations

The BL-1300 Series is classified as class 2 laser product. The

classification is based on IEC60825-1 following the Laser Notice No. 50

from FDA (CDRH).

 FCC regulations

The BL-1300 Series complies with the following FCC EMI regulations.

• FCC Part 15 Subpart B, Class B digital devices

 Canada IC (Industry Canada) regulations

The BL-1300 Series conforms to the following IC EMI regulations.

• ICES-003, Class B digital apparatus

 CE marking

The BL-1300 Series complies with the following essential requirements

of the EU Directives.

• EMC Directives (2004/108/EC)

• Low-voltage Directives (2006/95/EC)

The following harmonized standards are applied to these products in

order to confirm the compliance.

• Applicable standards (EMI) EN55011, Class A

EN55022, Class B

• Applicable standards (EMS) EN61000-6-2

EN61000-6-1

* The length of the communication and power cables should be less than 30

CAUTION

Precautions on use

•

The BL-1300 uses a 5 V DC power supply. Using a

different voltage level may damage the unit. When using

the KEYENCE power supply unit N-R2, N-R4, N-UB, N-L1,

NX-50 Series or DV-90 Series, select the voltage level

which can be supplied by the power supply unit. If a

nonconforming power supply is connected, the BL-1300

may be damaged.

• Before connecting or disconnecting the cable, be sure

to turn off any device connected to the BL-1300 Series.

Otherwise, the BL-1300 Series may be damaged.

• Do not disassemble or modify the BL-1300 Series, as

this may cause product failure.

• Locate cables as far as possible from high-voltage

lines and power lines. Otherwise, generated noise may

cause product failure or malfunctions.

•

Before mounting the BL-1300 Series, insulate the

mounting location. Otherwise, generated noise may cause

product failure or malfunctions.

• The BL-1300 is a

precision instrument.

Dropping the unit or

subjecting it to shock

may cause damage. Be

careful when

unpacking, carrying, an

mounting it. Do not

hold the units by their

cables.

• Do not hold the units by

their cables when carrying

them. The units may hit

each other and become

damaged.

If abnormal conditions are encountered

If the following conditions are encountered, turn off the

power supply unit immediately. Continuing to use the BL-

1300 Series under abnormal conditions may cause fire,

electric shock, or product failure. Contact your nearest

KEYENCE sales office (listed at the end of this manual)

for repairs.

• Water or foreign matter enters the BL-1300 Series.

• The BL-1300 Series is dropped or the housing is

damaged.

• The BL-1300 Series produces smoke or an abnormal

smell

Precautions on Regulations and Standards

Package Contents List

Main unit

Instruction manual

Mounting bracket

BL-1300/1301/1300HA/

1301HA/1370/1371

BL-1350HA/1351HA

BL-1300/1301/1300HA/

1301HA/1370/1371

BL-1350HA/1351HA

Mounting bracket: 1

Mounting bracket A and B: 1 each

Insulating spacer: 4

Washer: 4

Mounting screw (M3): 2

Laser warning seal set: 1

BL- 1300/1301/1300HA/

1301HA/1370/1371

BL-1350HA/1351HA

Laser Bar Code Reader

BL-1300 Series

Instruction Manual

 General precautions

•

Do not use this product for the purpose to protect a human body or

part of a human body.

•

This product is not intended for use as an explosion-proof product. Do

not use this product in a hazardous location and/or potentially

explosive atmosphere.

•

We recommend that you take substantial safety measures to avoid

any damage in the event a problem occurs.

•

If the BL-1300 is modified or used in any way other than described in

the specifications, its function and performance cannot be guaranteed.

•

When the BL-1300 is used in combination with other instruments, the

function and performance may be effected by operating conditions and

the surrounding environment.

•

It is prohibited to use or copy all or any part of this manual without prior

approval.

•

The information contained in this manual is subject to change without

notice.

 Safety precautions on laser product

The "BL-1300 Series Laser Barcode Reader" uses a visible laser light

source.

The BL-1300 Series barcode readers are equipped with the following

safety measures.

•

Laser radiation emission warning LED (LASER LED)

During laser emission, the LASER ON LED illuminates. The LED ON

status can be clearly visible through protective eyewear; specifically

designed for the wavelength of 660nm.

•

Laser forced OFF command

Sending the laser forced OFF command to the BL-1300 can inhibit

emission of laser beams. When working near the laser transmitter, be

sure to use the laser forced OFF command to avoid looking into the

laser beams.

* When this command is selected, the bottom STABILITY LED flashes.

 IEC warning/explanatory label locations

Use the suitable IEC warning/explanatory label included in the package

of this product according to the countries and/or regions where this

product is used.

In this case, it can be affixed on the IEC warning/explanatory label,

which has already been affixed to this product.

DANGER

Failure to follow these instructions may lead to death or

serious injury.

WARNING

Failure to follow these instructions may lead to injury.

CAUTION

Failure to follow these instructions may lead to product

damage (product malfunction, etc.).

Note

Provides additional information on proper operation.

TIPS

Indicates useful information or information that aids

understanding of text descriptions.

Safety information for BL-1300 Series

WARNING

Use of controls or adjustments or performance of

procedures other than those specified herein may result

in hazardous radiation exposure.

96M12614

Model

BL-1300, 1301, 1300HA, 1301HA, 1350HA, 1351HA, 1370, 1371

Wavelength 660 nm

Output 85 μW

Pulse duration 112 μs

Laser Class

FDA (CDRH)

Part 1040.10

Class 2 Laser Product

IEC 60825-1 Class 2 Laser Product

WARNING

• Follow the instructions mentioned in this manual.

Otherwise, injury to the human body (eyes and skin)

may result.

Precautions on class 2 laser products

• Do not stare into the beam.

• Do not direct the beam at other people or into areas

where other people unconnected with the laser work

might be present.

• Be careful of the path of the laser beam.

If there is a danger that the operator may be

exposed to the laser beam reflected by specular or

diffuse reflection, block the beam by installing an

enclosure with the appropriate reflectance.

•

Install the products so that the path of the laser beam

is not as the same height as that of human eye.

• Do not disassemble this product. Laser emission

from this product is not automatically stopped when

it is disassembled.

BL-1300/1301/1300HA/

1301HA/1370/1371

BL-1350HA/1351HA

1 2 3 4 5 6

Comentarios a estos manuales

Sin comentarios

Keyence BL-1300 Series Manual de usuario Pagina 2

Comentarios a estos manuales

Relacionado con productos y manuales para Sensores Keyence BL-1300 Series